|
Tiger Claw 50 Sqft Bag
EG 1 2 3 Hidden Fastener - 50 Sq/Ft
Designed exclusively for EverGrain composite decking
Anticorrosive coated steel for decreased visibility and enhanced performance
Excellent stability without the bounce and squeak of other hidden fasteners
Provides excellent hold-down power against wind uplift
Tested to ASTM E 330 and made in the U.S.A.
Easy installation - no special tools required
Formulated for use with EverGrain 1x6 or 2x6 deck boards
View Details
|
TCG50 |
Tiger Claw 50 Sqft Bag |
25 |
60.99 |
/ EA |
FM-F4058-TCGS |
|
|
Decking Hidden Butt Seams
TAMKO HIDDEN FASTENER BUTT SEAMS
These Butt Seam Clip has been specifically designed for butt seam applications when building with the TC-G hidden fastening system.
This clip has been designed as a mirror image of the TC-G clip allowing an installer to install two clips per joist at the butt seams.
This eliminates the need for additional joists and creates a much stronger connection.
The Clip is made of 304 grade stainless steel and is approved for use in saltwater applications and ACQ or chemically treated lumber for long-term performance.
The clip's sharp prongs embed into the upper portion of the groove for strong holding power.
The stainless steel screw ensures a lasting connection between decking board and joist.
All clips and screws included in every package
Spacer tabs on the clip automatically gap the decking 3/16" for a consistent look
View Details
|
TCG55 |
Decking Hidden Butt Seams |
6 |
45.99 |
/ EA |
|
|
|
Tiger Claw 500 Sqft Bucket
EG 1 2 3 Hidden Fastener - 500 Sq/Ft
Designed exclusively for EverGrain composite decking
Anticorrosive coated steel for decreased visibility and enhanced performance
Excellent stability without the bounce and squeak of other hidden fasteners
Provides excellent hold-down power against wind uplift
Tested to ASTM E 330 and made in the U.S.A.
Easy installation - no special tools required
Formulated for use with EverGrain 1x6 or 2x6 deck boards
View Details
|
TCGB |
Tiger Claw 500 Sqft Bucket |
5 |
415.99 |
/ EA |
TC-GB |
|
|
Tiger Claw Collated Scr For Tcgb
TAMKO PNEUMATIC SCREWS - 500 Sq/Ft
Size: #6 x 1-1/2".
TC-SG pneumatic screws for use with the Tiger Claw pneumatic gun. Use with Tiger Claw TC-G deck fastener.
View Details
|
TCGS |
Tiger Claw Collated Scr For Tcgb |
4 |
126.99 |
/ EA |
F-5906-GNSC |
|
|
Tiger Claw Pneumatic Gun
TIGER CLAW PNEUMATIC GUN
View Details
|
TCGUN |
Tiger Claw Pneumatic Gun |
1 |
377.99 |
/ EA |
F-5899-IGUN |
|
|
Tiger Claw Slot Cutter Rtr Bit
Olympic PPG R-5206-RB3W Tiger Claw Slot Cutter
The Tiger Claw Slot Cutter is specifically designed to cut grooves into square edge decking to match the Tigerclaw TC-G Clips
For use with many handheld routing tools
Simply route out the portion of the decking directly above the framing joists to accept hidden fastening clips.
View Details
|
TCSC |
Tiger Claw Slot Cutter Rtr Bit |
3 |
54.95 |
/ EA |
R-5206-RB |
|
|
Fiberon Camo Edge 90pc / 50sf
CAMO EDGE Clips HIDDEN DECK FASTENERS
EDGE Clips are for grooved wood and composite deck board installations in 90?patterns on wood joists.
Clips are designed and warranted for use with the leading grooved deck boards
Pre-assembled, one-pass fasteners require no partial installation--clips stay in place until you're ready to fasten
Clip is up to 88% stronger than competitors' clips in lateral movement, and up to 50% stronger in uplift holding power
Fasten with the included NEVER-MISS Guide or with the CAMO ClipDRIVE or CAMO DRIVE tool
Do not use impact drivers to fasten CAMO Clips
Plastic spacer creates 3/16 in. (4.7mm) spacing
T-15 Driver Bit included
90, 450, 900 count
View Details
|
FCEDGE90 |
Fiberon Camo Edge 90pc / 50sf |
38 |
49.95 |
/ EA |
CAMOEDGE90 |
|
|
Fiberon Camo Edge 450pc / 250sf
CAMO EDGE Clips HIDDEN DECK FASTENERS
EDGE Clips are for grooved wood and composite deck board installations in 90?patterns on wood joists.
Clips are designed and warranted for use with the leading grooved deck boards
Pre-assembled, one-pass fasteners require no partial installation--clips stay in place until you're ready to fasten
Clip is up to 88% stronger than competitors' clips in lateral movement, and up to 50% stronger in uplift holding power
Fasten with the included NEVER-MISS Guide or with the CAMO ClipDRIVE or CAMO DRIVE tool
Do not use impact drivers to fasten CAMO Clips
Plastic spacer creates 3/16 in. (4.7mm) spacing
T-15 Driver Bit included
90, 450, 900 count
View Details
|
FCEDGE450 |
Fiberon Camo Edge 450pc / 250sf |
5 |
216.95 |
/ EA |
CAMOEDGE450 |
|
|
Fiberon Camo Edge 900pc / 500sf
CAMO EDGE Clips HIDDEN DECK FASTENERS
EDGE Clips are for grooved wood and composite deck board installations in 90?patterns on wood joists.
Clips are designed and warranted for use with the leading grooved deck boards
Pre-assembled, one-pass fasteners require no partial installation--clips stay in place until you're ready to fasten
Clip is up to 88% stronger than competitors' clips in lateral movement, and up to 50% stronger in uplift holding power
Fasten with the included NEVER-MISS Guide or with the CAMO ClipDRIVE or CAMO DRIVE tool
Do not use impact drivers to fasten CAMO Clips
Plastic spacer creates 3/16 in. (4.7mm) spacing
T-15 Driver Bit included
90, 450, 900 count
View Details
|
FCEDGE900 |
Fiberon Camo Edge 900pc / 500sf |
7 |
364.95 |
/ EA |
CAMOEDGE900 |
|
|
Fiberon Camo Edge-x 90pc / 50sf
CAMO EDGEX0 Clips HIDDEN DECK FASTENER
EDGEX Clips are for grooved wood, composite, and PVC deck board installations in any deck pattern on wood joists
Clips are designed and warranted for use with the leading grooved deck boards
Pre-assembled, one-pass fasteners require no partial installation-clips stay in place until you're ready to fasten
Clip is up to 88% stronger than competitors' clips in lateral movement, and up to 50% stronger in uplift holding power
Fasten with the included NEVER-MISS Guide or with the CAMO ClipDRIVE or CAMO DRIVE
Do not use impact drivers to fasten CAMO Clips
Plastic spacer creates 3/16 in. (4.7mm) spacing
T-15 Driver Bit included
90, 450 count
View Details
|
FCEDGEX90 |
Fiberon Camo Edge-x 90pc / 50sf |
8 |
59.95 |
/ EA |
CAMOEDGEX90 |
|
|
Fiberon Camo Edge-x 450pc /250sf
CAMO EDGEX(R) Clips HIDDEN DECK FASTENER
EDGEX Clips are for grooved wood, composite, and PVC deck board installations in any deck pattern on wood joists
Clips are designed and warranted for use with the leading grooved deck boards
Pre-assembled, one-pass fasteners require no partial installation-clips stay in place until you're ready to fasten
Clip is up to 88% stronger than competitors' clips in lateral movement, and up to 50% stronger in uplift holding power
Fasten with the included NEVER-MISS Guide or with the CAMO ClipDRIVE or CAMO DRIVE
Do not use impact drivers to fasten CAMO Clips
Plastic spacer creates 3/16 in. (4.7mm) spacing
T-15 Driver Bit included
90, 450 count
View Details
|
FCEDGEX450 |
Fiberon Camo Edge-x 450pc /250sf |
16 |
227.95 |
/ EA |
CAMOEDGEX450 |
|
|
Fiberon Camo Starter/end 25pc
CAMO STARTER Clips -HIDDEN DECK FASTENERS
Achieve a fastener-free deck surface: secure the first and last grooved board with STARTER Clips
Contains 25 clips and 25 fasteners made of 304 Stainless Steel for superior corrosion resistance
Easy to install: place clips on the outside of the joist, center with the cross-joist, and fasten with your drill--do not use an impact driver CAMO STARTER Clips can also be used as an L-bracket
One package covers approximately 30 linear feet (joist spacing of 16 inches)
View Details
|
FCSEC25 |
Fiberon Camo Starter/end 25pc |
18 |
23.95 |
/ EA |
CAMOSEC |
|
|
Fiberon Camo Drive Tool
CAMO DRIVE(TM) Stand-Up Tool - DECK FASTENING SYSTEM
Install decking up to 5X faster with the cordless stand-up deck fastening tool that attaches to your drill.
Can be used for three fastening methods- Edge, Clip, and Face fastening -on any deck board surface.
Reversible handle, easy to swap out nose pieces, and quick to load
For exclusive use with CAMO Collated Deck Screws, EDGE Clips, EDGEX Clips, and EDGEXMETAL Clips.
Use DRIVE to fasten square pressure treated, KDAT, cedar, redwood, uncapped composites, PVC, and grooved deck boards.
Heavy-duty contractor grade tool is fast and reliable and has a one-year warranty.
Not for use with impact drivers.
Driver bits and nose pieces are included.
View Details
|
FCDRIVER |
Fiberon Camo Drive Tool |
4 |
184.95 |
/ EA |
CAMODRIVER |
|
|
Fiberon Camo Lever Tool
FIBERON CAMO LEVER TOOL
View Details
|
FCLEVER |
Fiberon Camo Lever Tool |
5 |
104.95 |
/ EA |
CAMOLEVER |
|
|
Fiberon Pro Plug Latte 100sf
FIBERON PRO PLUG LATTE 100SF
View Details
|
FPP350L |
Fiberon Pro Plug Latte 100sf |
12 |
109.95 |
/ EA |
FPP350LAT |
|
